Skip to content
Weather forecastWeather data: CC BY 4.0; temperatures rounded
Advertise

Sections

DailyDigest

Our network

Property

MetroLink works: what homeowners need to know about existing cracks

Homeowners near MetroLink may receive protection for construction-related damage to existing cracks, provided the change is properly recorded and linked to the works.

Homeowners near the proposed MetroLink route may be concerned about how construction could affect existing structural defects. Under the Property Owners’ Protection Scheme (POPS), additional damage caused by the works may be covered, even where a crack or bow in a wall was present before the project began.

The answer is potentially yes, subject to the scheme’s terms and a €75,000 limit per home. An existing crack does not automatically disqualify a property from protection. However, POPS does not guarantee that every future repair will be covered.

The key issue will be whether there is evidence of further movement or damage attributable to MetroLink construction. The scheme can apply to deterioration occurring during the works and for up to 12 months after the completion and operation of the metro.

Why a pre-works survey matters

Transport Infrastructure Ireland (TII) will offer a pre-works condition survey to owners of properties within 50 metres of the site extents. The inspection, carried out by a chartered building surveyor or registered engineer, records visible defects before construction starts.

Although the survey is not compulsory, allowing it is strongly advisable. It creates a documented baseline against which later changes can be assessed, while TII covers the cost. Homeowners should point out every concern during the inspection, including the location, history and apparent stability of any crack.

Owners should also retain older photographs, survey reports, engineer’s opinions and other records that demonstrate the wall’s previous condition. These documents may help distinguish long-standing defects from movement that happens after construction begins.

Monitoring cracks and vibration

Depending on the nature of the defect, additional monitoring may be appropriate. This can include:

  • Crack telltales: simple devices that provide a visual indication of relative movement.
  • Vibrograph monitoring: equipment installed on or near the property to record vibration above agreed alert or safety levels.
  • Interim inspections: follow-up checks if the owner reports new cracks or believes an existing defect has worsened.

Telltales are useful indicators but do not provide precise measurements and can themselves be damaged or displaced. Vibration monitoring therefore provides an important additional record during drilling and construction.

What happens if new damage appears?

If movement is suspected, the homeowner can notify TII’s engineering team. An interim survey may then investigate the change, compare it with the original condition report and assess whether the construction works are likely to have caused it.

Where repairs are recommended, they may be completed by a TII-appointed contractor in agreement with the owner. It may be sensible to wait until the works reach Practical Completion before carrying out permanent repairs, particularly if construction-related movement could continue.

Homeowners may prefer to appoint their own contractor, but the source guidance states that the cost of doing so will not be covered under the scheme. A post-works survey should also compare the property with its pre-construction condition.

  1. Accept the initial condition survey offered by TII.
  2. Explain the full history of any existing crack, bowing or other defect.
  3. Share historic photographs and structural documents with the surveyor.
  4. Ask whether telltales or vibration monitoring should be installed.
  5. Report new cracks or suspected movement promptly.
  6. Keep copies of all reports and correspondence.
  7. Discuss the timing and contractor for any proposed repairs before work begins.

The takeaway for affected homeowners

The Property Owners’ Protection Scheme may protect homeowners if MetroLink works cause additional damage to an existing defect, but the evidence must show what changed and whether the project caused it. The most important step is to establish an accurate pre-works record and preserve supporting evidence. A clear baseline gives TII and the homeowner the best chance of assessing any later movement fairly and consistently.

Suggested stories

Join the conversation

Your email address will not be published. Required fields are marked *

Guide & Tools